Search

What would you like to
search for?

Specifications
 

Shop-VacŪ Blower Vac Wet/Dry Vacuums

 
Performance Specifications
Peak Horsepower 2.5
Cubic Feet Per Minute
(CFM) of Air Flow
155
Sealed Pressure
(in inches)
52
Electrical Ratings 120V
60Hz
8.5A
Peak Air Watts 290
Terminology:

Horsepower Rating
Peak horsepower is the maximum output horsepower of a motor determined from a laboratory dynamometer test. Since peak horsepower is outside the normal operating range of a vacuum cleaner, it may not be indicative of actual air power differences when comparing two cleaners.

Tank Capacity
Working capacity may vary based on use.

SP (Sealed Pressure)
Suction pressure represents how far up a glass tube a vacuum motor will lift a column of water. This function is measured in inches. Maximum suction pressure or sealed water lift is obtained at zero air flow. Suction pressure decreases as air flow increases.

CFM (Cubic Feet Per Minute)
CFM is a measure of the quantity of air moved by the vacuum motor at a particular system load, such as 2-1/2" orifice. Your actual system load is determined by the type, size and length of the hose used, the accessory tool used and the filter system used. A dirty filter system can drastically affect the suction and air flow. The filters need to be cleaned regularly and replaced as necessary to avoid reduced suction and air flow.

Vacuum Performance
Vacuum performance or air power is the rate of work performed by a vacuum cleaner. Air power is a function of suction and air flow at an operating point. Air power is reduced by dirty filters, leaks and attachments used.

Specifications subject to change without notice.

 
 
Vac Finder - Click Here
       

Go Back GO BACK

 

Keep Connected with Shop-Vac

For Tips & Tricks, Promotions and News

Register Your Vac

Register your product You will receive an electronic coupon for a 10% discount*.