Shop-Vac® 16 Gallon* 6.5 Peak HP** Wet / Dry Utility Vacuum with SVX2® Motor Technology
Catalog No. - 5811600 Model No. - EAL16-SQ650
Shop-Vac®DIY & Workshop Series Wet Dry Vacs
The Shop-Vac® 16 Gallon* 6.5 Peak HP** Wet / Dry Utility Vacuum features the SVX2 Motor Technology. This new motor has more power and longer motor life when compared to the Shop-Vac® standard 6.5 peak HP** motor. The hose attaches to the rear blower port allowing you to blow the dirt out of hard to reach places. The transport handle folds down for easy storage.Features
- Cord Length: 18 Feet
- Hose Size: 2.5" Diameter
- Warranty: 5 Years
- Tank Drain
- Lock-On® Hose
- Blower Feature
- Onboard Accessory Storage
Includes
Accessories
- 8-foot by 2.5-inch diameter lock-on® hose
(Buy Online) - two 2.5-inch diameter extension wands
(Buy Online) - 14-inch wet/dry floor nozzle
(Buy Online) - elbow grip
(Buy Online) - crevice tool
(Buy Online) - 8-inch utility nozzle
(Buy Online) - tool storage
- hose storage
Filters
- Cartridge Filter
(Buy Online Type U) - Foam Sleeve
(Buy Online Type R) - 15-22 Gallon* High Efficiency Disposable Filter Bag
(Buy Online Type J)
Performance
Airflow, Max
150 CFMSealed Pressure
70 InchesElectrical Ratings
120V 60Hz 12 AmpsPeak Air Watts
365ASTM tested with 2.5-inch Shop-Vac® diameter hose
Horsepower Rating
**"Peak Horsepower" (PHP) is a term used in the wet-dry vacuum industry for consumer comparison purposes. It does not denote the operational horsepower of a wet-dry vacuum but rather the horsepower output of a motor, including the motor’s inertial contribution, achieved in laboratory testing. In actual use, Shop-Vac motors do not operate at the peak horsepower shown.
CFM (Cubic Feet Per Minute)
CFM is a measure of the quantity of air moved by the vacuum motor at a particular system load, such as 2-1/2" orifice. Your actual system load is determined by the type, size and length of the hose used, the accessory tool used and the filter system used. A dirty filter system can drastically affect the suction and air flow. The filters need to be cleaned regularly and replaced as necessary to avoid reduced suction and air flow.
SP (Sealed Pressure)
Suction pressure represents how far up a glass tube a vacuum motor will lift a column of water. This function is measured in inches. Maximum suction pressure or sealed water lift is obtained at zero air flow. Suction pressure decreases as air flow increases.
Vacuum Performance
Vacuum performance or air power is the rate of work performed by a vacuum cleaner. Air power is a function of suction and air flow at an operating point. Air power is reduced by dirty filters, leaks and attachments used.
Country of Origin: Made in U.S.A of U.S. and global components