Shop-Vac® 14 Gallon* 6.0 Peak HP** Stainless Steel Industrial Pump Vac

Catalog No. - 9601410  Model No. - 92P600CM  

Product Image
Peak HP**

Click Images to Enlarge.

Shop-Vac®Pump Series Wet Dry Vacs

14 Gallon* stainless steel industrial pump vac allows you to pump liquid out of the tank using a standard garden hose (not included).

Equipped with a 6' x 2.5" Lock-On® hose, a 8' x 1.25" Lock-On® hose, and 18' power cord. 

Includes (2) 2.5" extension wands, (2) 1.25" extension wands, 14" floor nozzle with brush, 10" wet/dry floor nozzle, crevice tool, utility nozzle, concentrator nozzle. elbow grip, and hose holder.

Comes with standard cartridge filter, foam sleeve for liquid pickup, and wet/dry tear resistant bag for use with wet or dry debris.


  • Cord Length: 18 Feet
  • Hose Size: 1.25" and 2.5" Diameter
  • Warranty: 1 Year
  • Tank Drain
  • Stainless Steel Tank
  • Lock-On® Hose
  • Blower Feature
  • Onboard Accessory Storage
  • Built In Water Pump



  • 8-foot by 1.25-inch diameter Lock-On® hose with curved end
    (Buy Online)
  • two 1.25-inch diameter extension wands
  • 10-inch by 1.25-inch diameter wet/dry nozzle
    (Buy Online)
  • 6-foot by 2.5-inch diameter lock-on® hose
  • two 2.5-inch diameter extension wands
    (Buy Online)
  • 14-inch by 2.5-inch diameter wet/dry floor nozzle
    (Buy Online)
  • 2.5-inch diameter elbow grip
  • 2.5-inch diameter crevice tool
    (Buy Online)
  • 8-inch by 2.5-inch diameter utility nozzle
    (Buy Online)
  • 2.5-inch diameter concentrator nozzle
    (Buy Online)
  • hose holder clip
  • tool storage basket



Airflow, Max

130 CFM

Sealed Pressure

50 Inches

Electrical Ratings

120V 60Hz 11.8 Amps

Peak Air Watts


ASTM tested with 2.5-inch Shop-Vac® diameter hose 

Horsepower Rating

**"Peak Horsepower" (PHP) is a term used in the wet-dry vacuum industry for consumer comparison purposes. It does not denote the operational horsepower of a wet-dry vacuum but rather the horsepower output of a motor, including the motor’s inertial contribution, achieved in laboratory testing. In actual use, Shop-Vac motors do not operate at the peak horsepower shown.

CFM (Cubic Feet Per Minute)

CFM is a measure of the quantity of air moved by the vacuum motor at a particular system load, such as 2-1/2" orifice. Your actual system load is determined by the type, size and length of the hose used, the accessory tool used and the filter system used. A dirty filter system can drastically affect the suction and air flow. The filters need to be cleaned regularly and replaced as necessary to avoid reduced suction and air flow.

SP (Sealed Pressure)

Suction pressure represents how far up a glass tube a vacuum motor will lift a column of water. This function is measured in inches. Maximum suction pressure or sealed water lift is obtained at zero air flow. Suction pressure decreases as air flow increases.

Vacuum Performance

Vacuum performance or air power is the rate of work performed by a vacuum cleaner. Air power is a function of suction and air flow at an operating point. Air power is reduced by dirty filters, leaks and attachments used.

Country of Origin: Assembled in U.S.A of U.S. and global components

Buy this product: