Skip to main content
Shop-Vac® 6 Gallon* 3.0 Peak HP** Wet/Dry Utility Vacuum
Shop-Vac® 6 Gallon* 3.0 Peak HP** Wet/Dry Utility Vacuum
Shop-Vac® 6 Gallon* 3.0 Peak HP** Wet/Dry Utility Vacuum
Shop-Vac® 6 Gallon* 3.0 Peak HP** Wet/Dry Utility Vacuum

Shop-Vac® 6 Gallon* 3.0 Peak HP** Wet/Dry Utility Vacuum


Item: #5982600
$86.99
or Shop Your Favorite Retailer

Shop-Vac®DIY & Workshop Series Wet Dry Vacs

The Shop-Vac® 6 Gallon* 3.0 Peak HP** Wet/Dry Utility Vacuum is great for cleaning up after your home improvement project. Use this vacuum for cleaning dirt and sawdust from your workbench and floor. The hose attaches to the rear blower port allowing you to blow the dirt out of those hard to reach places.


Parts List

User Manual

 

Cord Length: 6 Feet
Hose Size: 1.5" Diameter
Warranty: 3 Years
Lock-On® Hose
Blower Feature
Onboard Accessory Storage

8-foot by 1.5-inch diameter lock-on® hose
Two 1.5-inch diameter extension wands (91995)
12-inch floor nozzle (91991)
Gulper nozzle (91914)
Crevice tool (91996)
On-board tool storage
Hose holder

Cartridge Filter (90304 Type U)
Foam Sleeve (90585 Type R)
5-8 Gallon* Disposable Filter Bag (90661 Type E)

Airflow, Max: 65 CFM
Sealed Pressure: 55 Inches
Electrical Ratings: 120V 60Hz 8.4 Amps
Peak Air Watts: 150
ASTM tested with 1.5-inch Shop-Vac® diameter hose

Horsepower Rating
**"Peak Horsepower" (PHP) is a term used in the wet-dry vacuum industry for consumer comparison purposes. It does not denote the operational horsepower of a wet-dry vacuum but rather the horsepower output of a motor, including the motor’s inertial contribution, achieved in laboratory testing. In actual use, Shop-Vac motors do not operate at the peak horsepower shown.

CFM (Cubic Feet Per Minute)
CFM is a measure of the quantity of air moved by the vacuum motor at a particular system load, such as 2-1/2" orifice. Your actual system load is determined by the type, size and length of the hose used, the accessory tool used and the filter system used. A dirty filter system can drastically affect the suction and air flow. The filters need to be cleaned regularly and replaced as necessary to avoid reduced suction and air flow.

SP (Sealed Pressure)
Suction pressure represents how far up a glass tube a vacuum motor will lift a column of water. This function is measured in inches. Maximum suction pressure or sealed water lift is obtained at zero air flow. Suction pressure decreases as air flow increases.

Vacuum Performance
Vacuum performance or air power is the rate of work performed by a vacuum cleaner. Air power is a function of suction and air flow at an operating point. Air power is reduced by dirty filters, leaks and attachments used.

No reviews

Customer Reviews

No reviews yet Write a review

Your Cart


Shop-Vac® has a Limited Lifetime Home Use Warranty that applies to the original purchaser only and is not transferable.
Your cart is currently empty.
Click here to continue shopping.
Thanks for contacting us! We'll get back to you shortly. Thanks for subscribing Thanks! We will notify you when it becomes available! The max number of items have already been added There is only one item left to add to the cart There are only [num_items] items left to add to the cart